Solar panels offer a lot of benefits to anyone across different sectors. However, there are many safety concerns that one needs to take care of during the installation process. Solar installation safety is extremely important because the workers are at a height and dealing with electrical mechanisms. In this article, we will mention some important safety tips during installation.
Height Related Caution
The biggest and most obvious safety concern while working to install solar panels in a system is the height at which one works. Working in residential areas might be safer than working in a commercial or industrial space. Whenever there is a potential of falling and getting hurt, it becomes a safety hazard, so harnesses are important.
Creating boundaries and being vigilant about the area in which one is working becomes extremely important for all the installers’ solar system safety. Using roof hangers to connect harnesses is important for safety purposes and for getting the work done quickly. For smaller areas, roof anchor accessories can be installed for a day or two until the project is complete.
They can also be used for extended periods in case a larger system is being built. Permanent installation of anchor tools is also possible in case it is a long project or upgrade needs to be done in a short while. Using safety equipment on sloped roofs is extremely important for all installers.
Electric Safety
Electric shock is a real possibility, especially while working with direct current. Being very careful about safety regulations and using the right equipment will protect you to a great degree. Checking the manufacturer’s guidelines about rapid shutdown before using the equipment also helps.
Insulation helps in protecting from electric shocks, so make sure your gloves and tools are both insulated. Not wearing metal in the proximity of electrical equipment will also be a wise choice. Any items that can conduct electricity should be kept out of the vicinity of the electrical system.
All the wires and open connections should be adequately managed before allowing the current to pass through. Ask for the electrician to take a final look before finalizing everything. Use only a reliable industrial valve supplier so that there is no issue with the plumbing that can interfere with the electrical process.
Rainy Days
Whatever you do, never work with electricity during rainy days. It increases the chances of the installer getting an electric shock to the zenith. The human body is naturally conductive of electricity, and when you add water to the mix, you are a walking hazard. Apart from it being a safety hazard in terms of getting electric shocks, it is also extremely inconvenient.
Rain makes everything slippery so getting a good grip on the roof becomes difficult. No one wants to slip even if they are wearing a harness and helmet as it can cause an injury as well. The rainy water can also go into the house or the building if the work is not done with adequate safety. You can contact a zeolite supplier to keep the area right beneath the rood dry.
Work As A Team
Whatever the size of the installation is, you will never see an installer working alone. Working in a team not only increases efficiency but also helps ensure the safety of each member. A team is made to work together and protect the well-being of all the members.
From a practical point of view, the project will take less time with more people working together. However, in terms of safety, help will be more readily available if a mishap occurs. Exercising precautions will also be easier if the team follows the safety regulations. Companies usually send teams with good equipment, which might not be possible for a single installer.
Checking Damage
Checking the damage on the roof as well as on the equipment is important before starting the project. The roof needs to be fixed before installing the panels, and the equipment needs to be replaced immediately. The damage to solar panels would mean that certain cells are not working properly.
They will need to be repaired separately before finalizing the installation. It is a safety precaution because faulty equipment can lead to electrocution. Rather than risking safety, it is better to double-check.
The Takeaway
These five steps are essential to maintain safety standards during the Solar panel installation process. The precautions will have to be taken irrespective of whether one is working in a residential, commercial, or industrial area. Understanding one’s responsibility and taking care of electrical connections is extremely important during the installation of a solar system. Double-checking the harness or the electrical connections is highly advised.